For Clinicians
This page is for clinicians and prosthetists ordering a LegStyle cover on behalf of a client. For most orders, download the order form and send it through with the required scan information.
Every cover ordered with complete scan information is guaranteed to fit. If the fit ever needs adjusting, we work with you to resolve it at our expense.
How ordering works
Capture the scans
We work from a 3D scan of the prosthesis, plus a sound-side scan where available. The 3D scanning guidance (PDF) shows how to capture scans we can work from. If a sound-side scan is not practical, sound-side measurements are accepted instead.
Complete the order form
The order form (PDF) walks you through the rest: style and colour, shape, stiffness, trimlines, zipper placement, and hardware access.
Your patient may have chosen a cover on our website. Write the style and colour code they send you on the form. If they made their own design, they either email you the design file, which you send to us with the order form, or email it to us themselves: then write Make it your own and the name they gave their design as the style name, and we match the two.
Email it through
Send the completed form and scans to orders@legstyle.com. Add your PO or funding details once you have them.
Requests beyond the standard form
Requests are welcome. They take longer, and depending on the request may cost more. Standard orders vs custom projects (PDF) explains which route a case fits, and we agree the path with you before any work starts.
If you are unsure about anything, please reach out at any stage. We are always happy to talk a case through and make sure a cover is right for your client.
Print on demand
We also print parts from your own STL files, such as orthotic parts and R&D prototypes. Each part is printed in Nylon (rigid, for shells and outers) or Foam TPU (soft liner material) in Firm, Standard or Soft.
We print your files as supplied and do not assess their design or whether they are suitable for their intended use. You are responsible for the design, and for any testing and assessment needed to confirm that each part is suitable and safe before it is used. We are responsible for printing each part as ordered, with reasonable care and skill.
Pricing per part: a $50 fixed fee plus $1.00 per cm³ of material in the part. Shipping at cost. Typical lead time is one week from order confirmation, including shipping.
Email the completed form and your STL files to orders@legstyle.com. If the files are too large to email, use our upload link.
Guides
Pricing and funding
LegStyle covers are currently set up for Peke Waihanga ordering under:
Stock Code: 35974
- $595 + GST per cover (NZ pricing via the Peke Waihanga funding pathway)
- $545 + GST for children's covers (10 and under)
- $495 + GST for a second cover on the same setup, ordered within 3 months of delivery. After that, or if the prosthesis changes, it is quoted as a new job
- Refurbishment or re-print of a worn cover at a reduced rate. Get in touch for a quote
Australian and international pricing on enquiry.
After you order
Design review and turnaround
Every order includes a design review with renders for your approval before manufacture.
Typical turnaround is about three weeks from receiving the completed order information. A quick design review approval helps us keep to it. Custom requests and development projects run to their own timeline, agreed up front.
Every order gets a confirmed delivery date, and if anything changes we let you know early with a new date.
Fit guarantee
Every cover ordered with complete scan information is guaranteed to fit.
If the fit ever needs adjusting, we work with you to resolve it at our expense. Every fit issue clinicians have raised with us has been resolved. If a delivered cover is not sitting as expected, the cover sizing troubleshooting guide (PDF) covers the usual adjustments, and we are always happy to help directly.